Pasotel2 Top
The contents of service instructions download
Contacts FAQ's
The instructions after installing CSp-CE
[notice after installing]
  • The [connecting number] will disappear ,if you run hardware reset.
    •  Please make sure to make a back-up of the PDA.
    The registering method of destination.
    1.Select the [destination registration] ->[destination registration] from tool bar.
    2.Select the new button.
    3.Input the name and connecting number of destination.
    4.If the other side is using extension number ,please input the extension number.
    5.
    		Input the password if the other side has set the password.
    *input the connecting/extension number/password in one-byte characters.
    6.Complete the registration of destination by tapping the button of [OK].
    the method of connecting
    [if you do not use the list of destination]
    1.Please input the connecting number of destination PC/PDA (connecting number) by 10Key button.
    If you have extension number , please input if after the connecting number .
    2.Tap the [connection] button.
    [if it has been registered in the list of destination ]
    1.Select the destination PC/PDA (connecting number) from the list of destination.
    2.Tap the [connection] button.
     
    Function setting during connecting
     
    the changeover of transmission rate
  • If click on [transmission rate] and turn up it, the fast motion video can be obtained in high rate network.
    •  
    the changeover of image quality.
  • You can change the image resolution of incoming by [large/small size] button.
  • You can even change the image quality circumstantially if you tap when the button has been selected.
    •  
    the changeover of display
  • If you select the big size button and press the button of [full screen] ,the image will be displayed in full of the screen.
    • (if you tap the image , it will return to standard image in the condition of full screen.)
    the vertical/horizontal flip of the image
  • Retroflex the image vertical/horizontal
    •  
    brightness setting
  • Set the brightness of the incoming image.
    •  The image will become brighter when you press the + button.
     The image will become darker when you press the - button.
     The brightness will be set the standard one if you press the middle button.
     
    CSp-CE Testing destination number
    (destination Japan)connecting number [999139.228]Fixed camera
    (destination Japan)connecting number [999172.10]Unfixed camera